|
|
Post by 548h on Dec 22, 2013 20:03:19 GMT -6
Listen up! if you have slip fit collectors on your headers they will have to either be welded or tethered. And if you decide to tether them they have to be NHRA approved. This is for all cars, all classes and all events.
Best deal on approved header collector tethers we have found is from PRP. We are a dealer for them and can order any combo of clamps and cables you need.
|
|
|
|
Post by 69b1dart on Dec 23, 2013 2:28:35 GMT -6
I been reading this and keeping up what they say,class racer and yellow bullit has threads on this,a 1" weld would work or buy the approved nhra products out there,ihra doesn't require this,this is only for slip on collectors and headers bolt together,guess someones collector came off and they ran over it is why this came about
|
|
|
|
Post by 548h on Dec 23, 2013 20:05:42 GMT -6
Broken tabs, bolts fell out, whatever the reason collectors are falling off. Ask Dennis. I bet he's found plenty on the racetrack. I know it has happened to me before. Luckily no harm was done.
|
|
|
|
Post by sg3526 on Dec 23, 2013 20:56:47 GMT -6
Bought mine already from Jok Nicholson at Trailer Toad. $59.00 shipped to the door.
|
|
|
|
Post by 69b1dart on Dec 24, 2013 12:17:43 GMT -6
59 isn't a bad price,depending on size I see them up to a 100 bucks
|
|
|
|
Post by sg3526 on Dec 24, 2013 16:38:14 GMT -6
59 isn't a bad price,depending on size I see them up to a 100 bucks $59.00 any size or length just measure the size of the header tube and collector and how long you need them and they ship them to ya. |
|
|
|
Post by 69b1dart on Dec 25, 2013 3:15:48 GMT -6
sg3526,i didn't see them on there website,do they show them on there website somewhere,i have slip on clloecters,not really wanting to weld all my together
|
|
|
|
Post by sg3526 on Jan 5, 2014 19:43:06 GMT -6
sg3526,i didn't see them on there website,do they show them on there website somewhere,i have slip on clloecters,not really wanting to weld all my together Here ya go www.collector-cable.com/ |
|
|
|
Post by 548h on Jan 5, 2014 20:24:38 GMT -6
PRP does not have their version on the website yet. They sell all the pieces separate. Primary clamps, cables and secondary clamps. Since there are so many different headers types out there it makes the inventory and parts look up easier. They do make several parts that other places sell under their house brand labels. www.prpracingproducts.com/ |
|
