|
|
Post by 69b1dart on Jul 16, 2012 4:32:38 GMT -6
have a problem with transbrake not holding,wont work at idle but bring it to 2000 and it works,do i have a pressure problem
|
|
|
|
Post by sg3526 on Jul 16, 2012 6:31:09 GMT -6
have a problem with transbrake not holding,wont work at idle but bring it to 2000 and it works,do i have a pressure problem Sounds like it. Put a gauge on it and see where it's at. |
|
|
|
Post by 548h on Jul 16, 2012 22:05:35 GMT -6
most transbrake units operate in the 200 psi range. if it is lower than that between 1000 - 2000 but ok above there is likely wear or a leak. what type unit? and valve body?
|
|
|
|
Post by 69b1dart on Jul 17, 2012 7:25:36 GMT -6
a no name brand that tranzact sells that i got ripped off on
|
|
|
|
Post by dennismopar73 on Jul 17, 2012 11:28:49 GMT -6
No -name brand , is just that, cheap, maybe it will do the job , maybe it wont?
Tranzact, brand brake is one of the best out there.
But I'm not a 'brake' guy anyway!
AS for being ripped off, the issue you have may not be the 'brakes' fault ?
|
|
