|
Post by Crossbones Dennis on Dec 19, 2011 9:12:25 GMT -6
I believe my box is a Mega 75. I'll have to check on that. Once in a while it throws an almost exactly .1 delay off of what is programmed.
As most of you know I was new to the delay box racing the last season at GIR. I would have a couple of good rt's, let's say .020. Then it would go .120. So thinking it was me, I'd change the box and go a tenth red the next time.
I don't think it's driver error but it could be, because it's almost exactly a tenth everytime it does it. It's unpredictable you never know when it's going to do it.
I tried calling the biondo tech line and it was busy. I'll try again later.
I'm thinking about sending the box in to be tested and buying a new button to be sent back with it.
What type of button do you use and do you like it?
|
|
|
Post by Crossbones Dennis on Dec 19, 2011 9:17:05 GMT -6
Got through and he gave me another number. He thinks it's the button or soleniod.
|
|
|
Post by Crossbones Dennis on Dec 19, 2011 9:27:34 GMT -6
Digital Delay says they don't think it's the box. He will check it for $42 plus shipping. I think I'll send it in with the button. I'll probably end up buying a button anyway.
|
|
|
Post by 69b1dart on Dec 19, 2011 10:26:36 GMT -6
i would send it to him,while theres no racing,dont want that problem while racing
|
|
|
Post by sg3526 on Dec 19, 2011 12:29:37 GMT -6
Dennis there several things that come to mind here. First one being do you have any bump down or tap down set into the box? If you are double hitting the button that may cause some of your issues. Second one is what type of botton are you using? I use a micro switch type in both of my cars, takes very little to activate them and have proven to be the most consistant one for me. I would deifinately look at the settings on the box though and see exactly what it's set up for. The boxes can be set up for a very wide variety of different set ups. Two button with up to 4 hits at the tree or single buton with mutiple hits on the tree.
|
|
|
Post by Crossbones Dennis on Dec 19, 2011 13:44:28 GMT -6
I'd have to look at the bump down, I never used it. I'll check it before I pull the box.
|
|