|
|
Post by 396z on Nov 29, 2018 12:52:57 GMT -6
I’m already bored with Winter. So let’s hear what changes/Upgrades people have planned for 2019. Either to their race car or program.
|
|
|
|
Post by 396z on Nov 29, 2018 13:04:14 GMT -6
I always have spectacular plans, but time and health always limit my accomplishments. At a minimum I’m putting the full interior back in my Chevelle, returning it more and more to a street car. At a minimum the roadster is getting a freshened motor, a diaper and a chute. Planning on some fresh paint too. The body really took a beating last year. I plan to mostly run delay box classes next year for a change.
|
|
|
|
Post by bracketracing on Nov 29, 2018 15:24:58 GMT -6
I always have spectacular plans, but time and health always limit my accomplishments. At a minimum I’m putting the full interior back in my Chevelle, returning it more and more to a street car. At a minimum the roadster is getting a freshened motor, a diaper and a chute. Planning on some fresh paint too. The body really took a beating last year. I plan to mostly run delay box classes next year for a change. Welcome to delay box racing. I believe everyone should have a diaper, especially us old guys  |
|
|
|
Post by bracketracing on Nov 29, 2018 15:27:08 GMT -6
New valve springs on the WJ car and hopefully a 4 speed transmission. Freshen the 572 in the red car. It's been good to me so I'll be good to it. |
|
|
|
Post by 396z on Nov 29, 2018 16:40:26 GMT -6
New valve springs on the WJ car and hopefully a 4 speed transmission. Freshen the 572 in the red car. It's been good to me so I'll be good to it. What transmission will you use? That will certainly be exciting! |
|
|
|
Post by problemchild on Nov 29, 2018 17:04:48 GMT -6
going back to my favorite model car. will try to do more testing to get used to the car and run some old scool gasser shows
|
|
|
|
Post by 548h on Nov 29, 2018 17:37:18 GMT -6
Mustang gets bigger motor, chassis upgrades. Sponsorship offers will be accepted for review.
Then the Chevelle goes back to being a bracket car.
|
|
|
|
Post by bracketracing on Nov 29, 2018 17:48:37 GMT -6
New valve springs on the WJ car and hopefully a 4 speed transmission. Freshen the 572 in the red car. It's been good to me so I'll be good to it. What transmission will you use? That will certainly be exciting! Lenco just as it should be in Nostalgia Pro Stock |
|
|
|
Post by mixdemotionsfox on Nov 30, 2018 12:16:27 GMT -6
Im putting new 8.50 cage in car.
|
|
|
|
Post by 548h on Nov 30, 2018 12:39:20 GMT -6
Interested in a rolling chassis if the deal is right for 1000+ hp drivetrain. Prefer Fox chassis, or GM.
|
|
|
|
Post by bartc on Nov 30, 2018 15:43:34 GMT -6
Sponsorship offers will be accepted for review. How about a. Go fund me page |
|
|
|
Post by moparsz on Nov 30, 2018 20:24:10 GMT -6
Make some suspension changes on my dakota. Plus working on getting Dave's mustang back into driving street/race condition. Been sitting too long
|
|
|
|
Post by drphillips309 on Nov 30, 2018 21:05:10 GMT -6
That’s going to be awesome to see the championship mustang back at the track someday! Who’s going to drive? The wife? You? Brother? Paul?
|
|
|
|
Post by moparsz on Nov 30, 2018 21:37:00 GMT -6
That’s going to be awesome to see the championship mustang back at the track someday! Who’s going to drive? The wife? You? Brother? Paul? Not sure if Sheri will, Paul wouldn't fit in it, lol. I'll probably be the one to run it. Probably not in 2019, need to check over everything from sitting for I think 6 years, but I need to remount the seat further back. I'm probably 4-5" taller than Dave. I drove it around their subdivision 2 weeks ago. And its tight in the leg area for me. Also Dave wanted to swap at least the front drums over to rotor setup |
|
|
|
Post by 69b1dart on Dec 1, 2018 0:05:37 GMT -6
just put a new b-1 motor in,trans and convertor
|
|
