|
Post by bracketracing on May 17, 2015 21:05:37 GMT -6
Question for everyone. I have had my flex plate get loose on my car many times. Yes I use red loctite, last time I bought new in case it was bad. I used arp bolts there star washers. I've used lock washers and no washer. The engine is smooth I just hear it rattle. I'm on my 3rd flex plate and 3 different converters
|
|
|
Flex plate
May 17, 2015 21:29:57 GMT -6
via mobile
Post by 548h on May 17, 2015 21:29:57 GMT -6
What brand type of flex plate? We always have good luck with JW And arp bolts
|
|
|
Post by bracketracing on May 18, 2015 5:11:22 GMT -6
This is a tci and arp bolts other one don't remember.
|
|
|
Post by 548h on May 21, 2015 6:21:39 GMT -6
What about the shoulder on the crank flange? Possible it's out of spec?
|
|
|
Post by bracketracing on May 21, 2015 7:31:05 GMT -6
A thing is possible. Talked to tci clueless. Talked to coan very helpful he felt it was the balancer. I talked to fluidampr and they are sending me a new one I just have to send old one back to them. I have the one WJ used to use aluminum. They don't make them anymore.
|
|