Post by Crossbones Dennis on Dec 9, 2009 19:20:03 GMT -6
Illusion Cycles in Westminster, Calif., is now offering to consumers a limited number of Capt. America Commemorative choppers featuring many components made by West Coast Choppers.
Rusty Coones and Rod Requejo, co-owners of Illusion, say they will be working closely with WCC. The bikes, they say, will have an unmistakable WCC look.
Each Illusion Capt. America will be hand-fabricated at the Illusion factory to meet the personal requirements of each customer.
As with Illusion’s HellRazor bikes, Capt. America Commemoratives will feature driveline components that are CARB- and EPA-compliant. Each machine is covered by a full one-year factory warranty and qualifies for extended warrantee coverage from aftermarket companies.
Illusion motorcycles are listed in both the Kelly Blue Book and NADA directory, according to Illusion.
Reported specifications:
Engine: fully polished CARB- and EPA-certified S&S with 114 cubic inches
Transmission: Prowler RSD six-speed (patented steady bar w/bearing support)
Exhaust: WCC EPA-compliant header with Supertrapp muffler
Intake: 42 mm Mikuni with CARB-approved air box
Ignition: Spyke optical multi-spark/80,000-volt coil
Starter and charging: Spyke Stealth
Charging system: Compufire 40-amp three-phase
Drive: Primary 3-inch open belt. Final 530 O-ring chain
Frame: WCC 250 CFL rigid with spider web neck gusset and 35-degree rake
Front end: 41 mm wide-glide telescopic with 3-degree raked trees
Wheels: Colorado Custom forged Spider Web 18 x 8.5 front, 21 x 3.25 rear
Gas tank: WCC 3.6-gallon modified King Sport
Bars: 9-inch Illusion Mini Ape
Hand controls: Brembo with OEM switch housings
Tires: Metzeler 240 rear, 21 front
Brakes: Brembo four-piston full-floating front and rear
Fenders: WCC 10.5 with Spider Web struts rear, 5.5 front
Seat: Illusion 10-gauge pan with hand-tooled leather and adjustable billet shocks
Rusty Coones and Rod Requejo, co-owners of Illusion, say they will be working closely with WCC. The bikes, they say, will have an unmistakable WCC look.
Each Illusion Capt. America will be hand-fabricated at the Illusion factory to meet the personal requirements of each customer.
As with Illusion’s HellRazor bikes, Capt. America Commemoratives will feature driveline components that are CARB- and EPA-compliant. Each machine is covered by a full one-year factory warranty and qualifies for extended warrantee coverage from aftermarket companies.
Illusion motorcycles are listed in both the Kelly Blue Book and NADA directory, according to Illusion.
Reported specifications:
Engine: fully polished CARB- and EPA-certified S&S with 114 cubic inches
Transmission: Prowler RSD six-speed (patented steady bar w/bearing support)
Exhaust: WCC EPA-compliant header with Supertrapp muffler
Intake: 42 mm Mikuni with CARB-approved air box
Ignition: Spyke optical multi-spark/80,000-volt coil
Starter and charging: Spyke Stealth
Charging system: Compufire 40-amp three-phase
Drive: Primary 3-inch open belt. Final 530 O-ring chain
Frame: WCC 250 CFL rigid with spider web neck gusset and 35-degree rake
Front end: 41 mm wide-glide telescopic with 3-degree raked trees
Wheels: Colorado Custom forged Spider Web 18 x 8.5 front, 21 x 3.25 rear
Gas tank: WCC 3.6-gallon modified King Sport
Bars: 9-inch Illusion Mini Ape
Hand controls: Brembo with OEM switch housings
Tires: Metzeler 240 rear, 21 front
Brakes: Brembo four-piston full-floating front and rear
Fenders: WCC 10.5 with Spider Web struts rear, 5.5 front
Seat: Illusion 10-gauge pan with hand-tooled leather and adjustable billet shocks